Interprotect 2000E with Microplates is a unique two-part epoxy coating developed to protect fiberglass hulls from water absorption, which can lead to osmotic blistering. Microplates create an overlapping barrier to help stop water migration through the coating. The Interprotect system is the system of choice for repairing gel coats that have already been damaged by osmotic blistering.

 

Interprotect 2000E can be used above and below the waterline as a universal primer for all surfaces and has proven itself to be an excellent primer for all metals. It also can be used as part of a no-sand system.

• Two-part epoxy water barrier with Micro-Plates
• Up to two weeks is allowed between coats of InterProtect 2000E
• Now available in two colors, Gray and White
• Fast drying, easy application
• Sag resistance to ensure the elimination of sags and runs during application

 

The InterProtect products were introduced in 1985 for the repair and prevention of gelcoat blisters and quickly became the product of choice for professionals and do-it-yourselfers alike. In the ensuing years, it has become the standard by which everything else is measured. A study undertaken in 2001 reported that boats with InterProtect System on the bottom had a higher resale value than boats that did not. InterProtect has proven itself to be a universal primer. Below the waterline, it can be used for corrosion protection on all underwater metals for hulls keels, trim tabs, and running gear as well as for blister protection and as part of the Ultimate No Sand System for new fiberglass boats. Above the waterline, InterProtect is used on fiberglass and all metals. The InterProtect System was designed to repair hulls that have experienced gel coat blistering. However, the best time to attack hull blistering is before it happens. Taking preventative action before a problem occurs greatly reduces the likelihood of an expensive repair and has been shown to increase the resale value of your boat. If you’re buying a new boat, protect your investment with the InterProtect System before it ever goes into the water! INTERPROTECT AS A MULTI-USE PRIMER InterProtect is a universal primer for use above and below the waterline.

• InterProtect is a universal primer for use above and below the waterline.
• Repair and protection of gelcoat blistering
• Use InterProtect as a no-sand primer over no-skid decks
• Primer for cracked and crazed gelcoat
• Use Interfill  830 or Watertite for a complete fairing system
• Anticorrosive primer for bare metal
• Use over Epiglass Epoxy Resin and all clear epoxy resins
• Use as part of the ‘Ultimate’ No Sand System
• Oil & water resistant bilge coating
  

Extra freight charges may apply